Valentine Heart Magnetic Display

This project uses Magnetic Rolls and Rustic Birch Wood Sheets. It’s perfect for display on a chalkboard, other magnetic surface or it can be displayed in a 6×6 frame.

Supplies: Magnetic Roll, Rustic Brich Wood Sheet, Heart Pattern, Red Grid Pattern Paper, Red Polka Dot Pattern Paper, 1/2-inch Red Ribbon, Heart Punch (various sizes), Old Book Paper, Letters Die, Die Cutting Machine (Big Shot was used here), Paper Trimmer, Adhesive and Foam Dimensionals.

Valentine Heart Magnetic Display Instructions:

1. Trim a piece of old book paper and magnetic roll to 6×6. Set aside both.

2. Next, download your free copy of the heart pattern we used. Print and cut out, then trace onto a sheet of red grid pattern paper and cut out.

3. Using a sheet of Rustic Birch , cut the letters ‘L’, ‘O’, ”V’, and ‘E’ with the letters die and die cutting machine. Peel backing from letters and adhere to front of red grid pattern paper heart, stacking the ‘L’ and ‘O’ directly over the ‘V’ and ‘E’.

4. Using a mini heart punch, punch one heart from the red polka dot pattern paper. Adhere to the center of the ‘O’ with a foam dimensional.

5. Trim a piece of 1/2-inch red ribbon to approximately 15-inches in length. Wrap around the ribbon around the paper, approximately 1 1/-2 inches from the bottom of the sheet. Fasten with a knot and trim ends at an angle.

6. Adhere red grid pattern paper heart to the center of the 6×6 old book paper piece, over the top of the ribbon.

7. Next, adhere old book paper to paper side of 6×6 magnetic piece.

Love in Lights

Check out this LOVE Marquee we customized with BARC Cherry Wood paper. Marquee letters are super hot right now and you can find them everywhere. This LOVE marquee started out as metal and we added some rustic warmth with Cherry Wood Paper.  LOVE IT!

Supplies for LOVE Marquee: BARC Cherry Wood adhesive backed paper, LOVE Marquee, paper, hobby blade, scissors and pencil.

Instructions for LOVE Marquee:

  1. Trace marquee letters onto blank paper.
  2. Cut out traced letters .25 inch inside of trace line.
  3. Use cut out letters as a stencil to cut out Cherry Wood letters.
  4. Punch out holes from Cherry Wood letters where needed for lights.
  5. Adhere Cherry Wood letters to marquee.

Glitter Tape

Announcing our newest product … Glitter Tape! All the dazzling charm of glitter but with no mess. Our glitter tape comes in a variety of colors and designs. These projects were created using our Red Glitter Tape in a Wave design.

Glitter Tape – Wave Red

$3.39

Tape roll measures 15mm wide x 5m long (3/5″ x 5.5 yd) with a wave pattern and is Acid & Lignin free. The best part is that the glitter stays put, so no big mess! Perfect for all your projects.

We created these little red hanging hearts by punching into the glitter tape. So easy!